This modules handles operations on a generic Spi Flash Memory. The following operations are allowed:
- read/write data;
- check if flash is busy;
- enable write operations;
- erase sector;
- erase chip.
SpiFlash(drvname, cs, clock=1000000)¶
Initialize an external Flash memory specifying its:
- MCU SPI circuitry drvname (one of SPI0, SPI1, ... check pinmap for details);
- chip select pin cs;
- clock clock, default at 1MHz.
Returns 1 or 0 depending on whether the Flash is busy or not.
Write data data starting from address addr. data can be a bytearray or a list of integers less than 256.
erase_sector()MUST be called before writing data in a sector.
Writing is also allowed via bracket notation. The following is valid syntax:
my_flash[addr] = data
Erase a whole sector passing the addr address of any byte contained in it. All sector bytes set to 0xff.
Read n bytes of data starting from address addr.
Reading is also allowed via bracket notation. The following is valid syntax:
my_data = my_flash[addr:addr+n]
Erase the whole memory. All memory bytes set to 0xff.
Returns the bytes representation of the flash chip unique identifier. The length in bytes of the chip id must be passed as argument n.