This module define classes used in high-level threaded programming.
Zerynth VM offers native low-level primitives for multithreaded programming that can be difficult to use. This module abstracts such primitives to make them easy to use:
Thread class represents an activity that is run in a separate
thread of control. There are two ways to specify the activity: by passing a
callable object to the constructor, or by overriding the
method in a subclass. No other methods (except for the constructor) should be
overridden in a subclass. In other words, only override the
run() methods of this class.
Once a thread object is created, its activity must be started by calling the
start() method. This invokes the
method in a separate thread of control.
Once the thread’s activity is started, the thread is considered ‘alive’. It
stops being alive when its
run() method terminates – either
normally, or by raising an unhandled exception. The
method tests whether the thread is alive. The attribute
exc is the exception
generated by the
run() method or None.
Other threads can call a thread’s
join() method. This blocks
the calling thread until the thread whose
join() method is
called is terminated.
A thread has a name. The name can be passed to the constructor, and read or
changed through the
A thread has also an id. The id is determined after
start() is called and can be accessed
Thread(target=None, name=None, args=())¶
This constructor should always be called with keyword arguments. Arguments are:
target is the callable object to be invoked by the
run()method. Defaults to
None, meaning nothing is called.
name is the thread name. By default, a unique name is constructed of the form “Thread-N” where N is the thread id.
args is the argument tuple for the target invocation. Defaults to
If the subclass overrides the constructor, it must make sure to invoke the base class constructor (
Thread.__init__()) before doing anything else to the thread.
start(prio = PRIO_NORMAL, size=512)¶
Start the thread’s activity.
It must be called at most once per thread object. It arranges for the object’s
run()method to be invoked in a separate thread of control.
This method will raise a
RuntimeErrorif called more than once on the same thread object.
prio and size are used to set the thread priority and the stack size.
Method representing the thread’s activity.
You may override this method in a subclass. The standard
run()method invokes the callable object passed to the object’s constructor as the target argument, if any, with sequential arguments taken from the args argument.
Wait until the thread terminates. This blocks the calling thread until the thread whose
join()method is called terminates – either normally or through an unhandled exception –, or until the optional timeout occurs.
When the timeout argument is present and not less than zero, it should be a integer number specifying a timeout for the operation in milliseconds. As
None, you must call
join()to decide whether a timeout happened – if the thread is still alive, the
join()call timed out.
When the timeout argument is not present or less than zero, the operation will block until the thread terminates.
A thread can be
join()ed many times.
Return whether the thread is alive.
This method returns
Truejust before the
run()method starts until just after the
A string used for identification purposes only. It has no semantics. Multiple threads may be given the same name. The initial name is set by the constructor.
The ‘thread identifier’ of this thread or
Noneif the thread has not been started. This is a non negative integer. Thread identifiers may be recycled when a thread exits and another thread is created. The identifier is available even after the thread has exited.
A Lock object can be in two states: locked or unlocked. When a Lock object is created it starts unlocked.
A thread can try to lock a Lock object:
- if the Lock object is already locked the thread will block until the Lock object is unlocked by some other thread.
- if the Lock object is unlocked, it becomes locked and the thread continues execution.
A thread can also try to unlock a Lock object that it had previously locked:
- if no other threads are waiting for the Lock object to become unlocked, the Lock object becomes unlocked
- if one or more threads are waiting for the Lock object to become unlocked, one of them is selected and can continue from where it left. All the other waiting threads remain blocked. The Lock object remains locked.
Lock object are tipically used to gain exclusive access to a resource:
import streams import threading # open a serial port: our resource streams.serial("ser1") # create a lock lock = threading.Lock() # define a function to be launched as a thread def threadfun(msg): while True: # if it's unlocked, lock it and continue printing. Else wait. lock.acquire() print(msg) # unlock and allow another thread to call the print lock.release() # launch thread 1 thread(threadfun,"Hello") # launch thread 2 thread(threadfun,"World")
Both threads in the example will compete to call
print(msg). The Lock object ensure that while one thread is printing on the serial port, the other one is blocked, waiting for the message to be printed.
Acquire a lock, blocking or non-blocking.
When invoked with the blocking argument set to
True(the default), block until the lock is unlocked, then set it to locked and return
When invoked with the blocking argument set to
False, do not block. If a call with blocking set to
Truewould block, return
Falseimmediately; otherwise, set the lock to locked and return
When invoked with the integer timeout argument set to a positive value, block for at most the number of milliseconds specified by timeout and as long as the lock cannot be acquired. A timeout argument of
-1specifies an unbounded wait. It is forbidden to specify a timeout when blocking is false.
The return value is
Trueif the lock is acquired successfully,
Falseif not (for example if the timeout expired).
Release a lock. This can be called from any thread, not only the thread which has acquired the lock.
When the lock is locked, reset it to unlocked, and return. If any other threads are blocked waiting for the lock to become unlocked, allow exactly one of them to proceed.
This class implements semaphore objects. A semaphore manages a counter representing the number of
release()calls minus the number of
acquire()calls, plus an initial value. The
acquire()method blocks if necessary until it can return without making the counter negative. If not given, value defaults to 1.
The optional argument gives the initial value for the internal counter; it defaults to
1. If the value given is less than 0,
Acquire a semaphore.
When invoked without arguments: if the internal counter is larger than zero on entry, decrement it by one and return immediately. If it is zero on entry, block, waiting until some other thread has called
release()to make it larger than zero. This is done with proper interlocking so that if multiple
acquire()calls are blocked,
release()will wake exactly one of them up. The implementation may pick one at random, so the order in which blocked threads are awakened should not be relied on. Returns true (or blocks indefinitely).
When invoked with blocking set to false, do not block. If a call without an argument would block, return false immediately; otherwise, do the same thing as when called without arguments, and return true.
When invoked with a timeout other than -1, it will block for at most timeout milliseconds. If acquire does not complete successfully in that interval, return false. Return true otherwise.
Release a semaphore, incrementing the internal counter by one. When it was zero on entry and another thread is waiting for it to become larger than zero again, wake up that thread.
Class implementing event objects. An event manages a flag that can be set to true with the
set()method and reset to false with the
wait()method blocks until the flag is true. The flag is initially false.
Set the internal flag to true. All threads waiting for it to become true are awakened. Threads that call
wait()once the flag is true will not block at all.
Return true if and only if the internal flag is true.
Block until the internal flag is true. If the internal flag is true on entry, return immediately. Otherwise, block until another thread calls
set()to set the flag to true, or until the optional timeout occurs.
When the timeout argument is present and
>0, it should be an integer number specifying a timeout for the operation in milliseconds.
This method returns true if and only if the internal flag has been set to true, either before the wait call or after the wait starts, so it will always return
Trueexcept if a timeout is given and the operation times out.
A condition variable is always associated with some kind of lock; this can be passed in or one will be created by default. Passing one in is useful when several condition variables must share the same lock. The lock is part of the condition object: you don’t have to track it separately.
A condition variable must be locked with
acquire() before any other method
can be called, and unlocked with
release() when done calling methods.
wait() method releases the lock, and then blocks until
another thread awakens it by calling
notify_all(). Once awakened,
re-acquires the lock and returns. It is also possible to specify a timeout.
notify() method wakes up one of the threads waiting for
the condition variable, if any are waiting. The
method wakes up all threads waiting for the condition variable.
don’t release the lock; this means that the thread or threads awakened will
not return from their
wait() call immediately, but only when
the thread that called
finally relinquishes ownership of the lock.
The typical programming style using condition variables uses the lock to
synchronize access to some shared state; threads that are interested in a
particular change of state call
wait() repeatedly until they
see the desired state, while threads that modify the state call
notify_all() when they change
the state in such a way that it could possibly be a desired state for one
of the waiters. For example, the following code is a generic
producer-consumer situation with unlimited buffer capacity:
# Consume one item cv.acquire() while not an_item_is_available(): cv.wait() get_an_available_item() cv.release() # Produce one item cv.acquire() make_an_item_available() cv.notify() cv.release()
while loop checking for the application’s condition is necessary
wait() can return after an arbitrary long time,
and the condition which prompted the
notify() call may
no longer hold true. This is inherent to multi-threaded programming. The
wait_for() method can be used to automate the condition
checking, and eases the computation of timeouts:
# Consume an item cv.acquire() cv.wait_for(an_item_is_available) get_an_available_item() cv.release()
To choose between
consider whether one state change can be interesting for only one or several
waiting threads. E.g. in a typical producer-consumer situation, adding one
item to the buffer only needs to wake up one consumer thread.
The order of awakened threads may correspond to the order of wait in a fifo style, but this is not guaranteed for every VM.
This class implements condition variable objects. A condition variable allows one or more threads to wait until they are notified by another thread.
Acquire the underlying lock. This method calls the corresponding method on the underlying lock; the return value is whatever that method returns.
Release the underlying lock. This method calls the corresponding method on the underlying lock; there is no return value.
Wait until notified or until a timeout occurs. If the calling thread has not acquired the lock when this method is called, a
This method releases the underlying lock, and then blocks until it is awakened by a
notify_all()call for the same condition variable in another thread, or until the optional timeout occurs. Once awakened or timed out, it re-acquires the lock and returns.
When the timeout argument is present and not less than zero, it should be a integer number specifying a timeout for the operation in milliseconds.
The return value is
Trueunless a given timeout expired, in which case it is
Wait until a condition evaluates to True. predicate should be a callable which result will be interpreted as a boolean value. A timeout may be provided giving the maximum time to wait.
This utility method may call
wait()repeatedly until the predicate is satisfied, or until a timeout occurs. The return value is the last return value of the predicate and will evaluate to
Falseif the method timed out.
Ignoring the timeout feature, calling this method is roughly equivalent to writing:
while not predicate(): cv.wait()
Therefore, the same rules apply as with
wait(): The lock must be held when called and is re-acquired on return. The predicate is evaluated with the lock held.
By default, wake up one thread waiting on this condition, if any. If the calling thread has not acquired the lock when this method is called, a
This method wakes up at most n of the threads waiting for the condition variable; it is a no-op if no threads are waiting.
The current implementation wakes up exactly n threads, if at least n threads are waiting.